4pc 2″ Thick | 4×4 to 4×4 Wheel Spacers fits EZ GO Club Car Golf Cart 50mm Overall Width

Vehicle Bolt Pattern: 4×4

Wheel Bolt Pattern: 4×4

Hub Bore: 66mm

Thread Pitch: 1/2″

Thickness: Each Spacer Measure 2″ Thick
THESE SPACERS WILL FITS ONTO THE FOLLOWING VEHICLES
These will bolt up to most Golf Carts that have a 4×4 or 4×100 bolt pattern.
ADDITIONAL INFORMATION
Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
Installation needs to be performed by a trained professional
It’s Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
Your lugs studs will need to be shortened by grinding them down
You can replace your studs will shorter studs
if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS